FREE LOG VOLUME & VALUE CALCULATOR

Two measurements.
See what’s in your log.

For your first log or your next milling job.

01 MEASURE YOUR LOG

How will you measure the width?

More than one log? / Bark options

Different sizes? Calculate each log separately. No automatic bark deduction.

Measure from a photo instead
①Add a photoInclude a known scale.
②Mark two linesThe scale, then your log.
③Check & confirmYou approve the size.

Photo stays on your device. This measures marked lines; it does not recognise depth.

Take a suitable photo

Keep the scale and measurement in the same plane. Point the camera straight at them. Use a side-on photo for length, or a clear view across the midpoint for diameter. End-face width may differ from midpoint width. If edges or scale are unclear, use a tape instead.

No photo is uploaded. JPG, PNG or WebP, up to 12 MB.

Choose a clear photo to begin.

Repeat with a suitable photo for each measurement, or enter it directly above.

Calculation details & limitations

Hoppus feet = mid-girth in inches squared × length in feet ÷ 2,304 × log count. Diameter is converted to circumference by multiplying by π, assuming a circular cross-section. Metric measurements are converted using 2.54 cm per inch and 0.3048 m per foot. Cylinder-equivalent m³ = Hoppus feet × 4/π × 0.028316846592.

Purchase planning adds the manually entered log purchase estimate, milling, transport and other processing costs. This is a spending estimate, not a profit or sawn yield forecast.

Valuation = the volume in your selected price unit × your manually entered rate, minus total deductions. The £/m³ option uses the midpoint / Huber approximation. Negative results are shown rather than hidden. No live feed or species price database is connected. Changing species does not automatically change the price.

Match your price to the species, grade, bark basis and sale conditions. Do not enter a £/m³ or finished-board price as a £/Hoppus foot log price. Rot, metal, taper, access, felling, transport, VAT and buyer requirements can materially change the outcome. This is not an offer to buy, a formal valuation or a guarantee of usable yield.

Formula reference: FAO / ITTO / UNECE — Forest product conversion factors.

Learn about Hoppus & other methods

Think of volume as the amount of wood in a log. This tool shows two ways of describing it from the same midpoint measurement.

Hoppus feet: a traditional roundwood trade measure using a quarter of the log’s circumference. It is a convention, not the actual volume of boards you will recover.

Cubic metres (Huber approximation): midpoint cross-sectional area × length. One cubic metre is the volume of a 1 m × 1 m × 1 m cube. It is easier to compare with metric measurements, but remains an estimate for an irregular log.

Example: a log 48 inches around and 10 feet long is 10 Hoppus feet, or about 0.361 m³ using the midpoint approximation. Neither figure guarantees your finished timber yield.

Other survey methods: Smalian uses both end areas; Newton uses both ends and the midpoint. They require extra measurements, so this simple tool does not silently substitute them or invent missing dimensions. Tonnes also require a measured weight or a justified density and moisture assumption.

Forest Research: Forest mensuration handbook · FAO: log volume methods

Remove a shared record

Need help with your timber?

Talk to us about your logs, access and milling options.

Contact National Sawmills →

Please enable JavaScript to use the calculator. Nothing has been submitted. You can contact National Sawmills for help.